Synthesis and Chiroptical Properties of Chiral Carbazole-Based BODIPYs

A series of carbazole-based boron dipyrromethenes (BODIPYs) 2 a – g bearing binaphthyl units have been synthesized by the Et₂AlCl-mediated reaction of the corresponding BODIPY difluorides 1 a – g with 1,1′-binaphthalene-2,2′-diol. Substituents such as halogen, nitrile, and amino groups were tolerated under the reaction conditions, and the reaction of the phenylethynyl-substituted 1 h gave (R,R)- 3 h bearing two binaphthyl units. The chiroptical properties of these dyes with different substituents were investigated by UV/Vis, CD, fluorescence, and circularly polarized luminescence (CPL) spectroscopy. The CD spectra showed Cotton effects in the absorption region of the BODIPY moieties. In addition, they showed CPL both in solution and in the solid state. Interestingly, several dyes recorded higher g_lum values in the solid state, probably due to intermolecular interactions. Because (R,R)- 3 h recorded relatively low g_lum values, the diastereomer (R,S)- 3 h was prepared. The (R,S) diastereomer showed intense CPL, which suggests a synergetic effect of the two binaphthyl groups. Finally, chiral carbazole-based BODIPY dimers have been synthesized for the first time and their chiroptical properties were investigated. They showed redshifted fluorescence and CPL, which reached the near-IR (NIR) region in the solid state.     

Transition-Metal-Free Multiple Functionalization of Piperidines to 4-Substituted and 3,4-Disubstituted 2-Piperidinones

Remote and multiple functionalization of piperidines without the use of transition-metal catalysts and elaborate directing groups is one of the major challenges in organic synthesis. Herein is reported an unprecedented two-step protocol that enables the multiple functionalization of piperidines to either 4-substituted or trans-3,4-disubstituted 2-piperidones. First, by exploiting the duality of TEMPO reactivity, which under oxidative and thermal conditions fluctuates between cationic and persistent-radical form, a novel multiple C(sp³)-H oxidation of piperidines to α,β-unsaturated 2-piperidones was developed. Second, the intrinsic low reactivity of the unsaturated piperidones toward conjugated Grignard additions was overcome by using trimethylsilyl chloride (TMSCl) as Lewis acid. Subsequently, conjugated Grignard addition/electrophilic trapping protocol provided substituted 2-piperidone intermediates, some of which were then transformed into pharmaceutical alkaloids.     

Compressing a Non-Planar Aromatic Heterocyclic [7]Helicene to a Planar Hetero[8]Circulene

This work describes a synthetic approach where a non-planar aromatic heterocyclic [7]helicene is compressed to yield a hetero[8]circulene containing an inner antiaromatic cyclooctatetraene (COT) core. This [8]circulene consists of four benzene rings and four heterocyclic rings, and it is the first heterocyclic [8]circulene containing three different heteroatoms. The synthetic pathway proceeds via a the flattened dehydro-hetero[7]helicene, which is partially a helicene and partially a circulene: it is non-planar and helically chiral as helicenes, and contains a COT motif like [8]circulenes. The antiaromaticity of the COT core is confirmed by nucleus independent chemical shift (NICS) calculations. The planarization from a helically π-conjugated [7]helicene to a fully planar heterocyclic [8]circulene significantly alters the spectroscopic properties of the molecules. Post-functionalization of the [7]helicenes and the [8]circulenes by oxygenation of the thiophene rings to the corresponding thiophene-sulfones allows an almost complete fluorescence emission coverage of the visible region of the optical spectrum (400–700 nm).     

Electronic Finetuning of 8-Methoxy Psoralens by Palladium-Catalyzed Coupling: Acidochromicity and Solvatochromicity

Differently 5-substituted 8-methoxypsoralens can be synthesized by an efficient synthetic route with various cross-coupling methodologies, such as Suzuki, Sonogashira and Heck reaction. Compared to previously synthesized psoralens, thereby promising daylight absorbing compounds as potentially active agents against certain skin diseases can be readily accessed. Extensive investigations of all synthesized psoralen derivatives reveal fluorescence in the solid state as well as several distinctly emissive derivatives in solution. Donor-substituted psoralens exhibit remarkable photophysical properties, such as high fluorescence quantum yields and pronounced emission solvatochromicity and acidochromicity, which were scrutinized by Lippert–Mataga and Stern–Volmer plots. The results indicate that the compounds exceed the limit of visible light, a significant factor for potential applications as an active agent. In addition, (TD)DFT calculations were performed to elucidate the underlying electronic structure and to assign experimentally obtained data.     

Stereochemistry-Controlled Supramolecular Architectures of New Tetrahydroxy-Functionalised Amphiphilic Carbocyanine Dyes

The syntheses of novel amphiphilic 5,5′,6,6′-tetrachlorobenzimidacarbocyanine (TBC) dye derivatives with aminopropanediol head groups, which only differ in stereochemistry (chiral enantiomers, meso form and conformer), are reported. For the achiral meso form, a new synthetic route towards asymmetric cyanine dyes was established. All compounds form J aggregates in water, the optical properties of which were characterised by means of spectroscopic methods. The supramolecular structure of the aggregates is investigated by means of cryo-transmission electron microscopy, cryo-electron tomography and AFM, revealing extended sheet-like aggregates for chiral enantiomers and nanotubes for the mesomer, respectively, whereas the conformer forms predominately needle-like crystals. The experiments demonstrate that the aggregation behaviour of compounds can be controlled solely by head group stereochemistry, which in the case of enantiomers enables the formation of extended hydrogen-bond chains by the hydroxyl functionalities. In case of the achiral meso form, however, such chains turned out to be sterically excluded.     

共振瑞利散射法对普萘洛尔特效适配体系的手性分析

本文提出了对于手性药物普萘洛尔手性识别和手性分析的新方法。 该方法引用基于氧化石墨烯的指数富集配体系统进化筛选技术(GO-SELEX),经过10轮优化筛选出对心血管药物普萘洛尔有高度亲和力的特效适配体。 然后通过共振瑞利散射光谱法(RRS)对反应体系进行特效性检测,实验表明S-普萘洛尔和R-普萘洛尔有迥然不同的光谱差异,S-普萘洛尔与特效适配体结合后的RRS显著增强,而R-普萘洛尔与适配体结合后的RRS几乎没有变化。 据此可以对心血管药物手性普萘洛尔进行有效的手性识别。 在考察反应体系和实验条件的基础上,可对S-普萘洛尔进行实验检测,同时对外消旋体中的R-普萘洛尔进行计算分析。 实验对S-普萘洛尔的线性范围为5~275 nmol/L,检测限为0.5 nmol/L。 方法应用于外消旋药片的分析检测,结果令人满意。 实验表明,RRS检测特效适配体结合的手性靶标体系会彰显不同的光谱差异,从而可对手性对映体进行手性识别,尤其是可利用其光谱差异实现同时测定的手性分析,方法可在特殊情形下不经分离而同时测定手性对映体,具有推广应用价值。     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

Statistical analysis of S/N-curves by means of a fatigue database for polypropylene

Material databases of plastics are becoming more and more the focus of applied science and commercial use in industry. Material properties of material manufacturers are often provided in publicly accessible material databases, which usually contain processing and mechanical properties under static loadings. Fatigue strength values are usually not accessible. The fatigue data for thermoplastics is of particular interest, as these materials have a particularly high lightweight construction potential and can be processed with a high degree of automation and reproducibility.Individual fatigue strength parameters for a specific material, environmental condition, geometry and loadings have been investigated in numerous publications. However, no work has been found in which fundamental interactions of different materials, environmental conditions, geometries and loadings on the course of the S/N-Curve have been investigated.In this paper, different effect relationships between temperature, filler type and filler content, fiber orientation and load ratio will be presented for the material Polypropylene (PP). A fatigue strength database of 11 different material manufacturers, from 71 different S/N-Curves with 606 tested samples, serves as a basis. The fatigue database enables a digital twin, which is used for the design of structural components to add a third dimension with artificial intelligence, and which is trained by an engineer. From the determined effect relationships, fatigue factors are to be derived and can be used to evaluate the fatigue strength of a component in the design process and to train the digital twin. The fatigue-strength values from the database also allow a statistical consideration of the slope k and the scattering of the S/N-Curve. The different S/N-Curves are transferred into a Haigh diagram, from which the functional course of the mean stress is determined.     

Experimental and molecular simulating study on promoting electrolyte-immersed mechanical properties of cellulose/lignin separator for lithium-ion battery

Lithium-ion batteries have been developing intensively and earn an unprecedented reputation, yet advanced performance and safety issue still require considerable investigation. Separator is vital to comprehensive properties of batteries, where the mechanical properties are key to breaking through of new-type separator. Unfortunately, electrolyte submersion has caused damage to strength of cellulose separator. Whereupon, in this work, cellulose separator is optimized by introducing lignin particles to promote electrolyte-immersed mechanical strength. Experiments are conducted concerning surface morphology, contact angle, porosity, electrolyte uptake, mechanical properties and electrochemical performance. Molecular simulation is implemented to explore the mechanism of tensile behavior of cellulose and lignin subjected to electrolyte solvents. Experimental results confirm positive effect of lignin addition in improving mechanical properties and simultaneously maintaining impressive electrochemical performance of the cellulose/lignin composites separators. Besides, lignin addition amount of 2.5% and 5% is recommended to achieve promising overall properties. Molecular simulation has successfully unveiled that weakening of cellulose separator submerged in electrolyte is resulted by the deformed cellulose amorphous region and the promoting effect of adding lignin is contributed from the new hydrogen bonds generated between cellulose and lignin molecules. Hopefully, this work provides novel insight on preparing remarkable separator and mechanism of materials behavior.     

Exciton Interactions,Excimer Formation,and [2π+2π] Photodimerization in Nonconjugated Curcuminoid-BF2 Dimers

We describe the synthesis of a series of covalently linked dimers of quadrupolar curcuminoid-BF₂ dyes and the detailed investigation of their solvent-dependent spectroscopic and photophysical properties. In solvents of low polarity, intramolecular folding induces the formation of aggregated chromophores, the UV/Vis absorption spectra of which display the optical signature characteristic of weakly-coupled H-aggregates. The extent of folding and, in turn, of ground-state aggregation is strongly dependent on the nature of the flexible linker. Steady-state and time-resolved fluorescence emission spectroscopies show that the Frenkel exciton relaxes into a fluorescent symmetrical excimer state with a long lifetime. Furthermore, our in-depth studies show that a weakly emitting excimer lies on the pathway toward a photocyclomer. Two-dimensional ¹H NMR spectroscopy and density functional theory (DFT) allowed the structure of the photoproduct to be established. To our knowledge, this represents the first example of a [2π+2π] photodimerization of the curcuminoid chromophore.